UNO R3 Board for Arduino:
Arduino IDE download link:
https://www.arduino.cc/en/Main/OldSoftwareReleases#previous
Note: If your pc can't recognize the board, pls update the driver in Arduino IDE folder for your PC.

Digital I/O Digital inputs/outputs: 0~13
Analog I/O Analog input/output: 0~5
Support ISP download function.
The input voltage: when connected to the computer USB without external power supply,external power supply 7v to 12v dc input voltage.
Output voltage: 3.3 V and 5 V dc voltage output dc voltage output.

Game Joystick Shield V1 Expansion Board:
Here we have a Joystick shield that sits atop your Arduino and turns it into a simple controller.
7 momentary push buttons (4 big buttons, 2 small buttons, and a joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of the old Nintendo controllers.

NRF24L01 2.4GHz Wireless RF Antenna Transceiver Module:
Ultra small: 15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardware.
Low power consumption: Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby.
Low operating voltage: 1.9 ~ 3.6V When using the nRF24L01 with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module
Communication range: 262 feet (80 meters) in ideal conditions.

Bluetooth RF Transceiver Module RS232:
Bluetooth version: V2.0+EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft

Package Included:
1 x UNO R3 Board For Arduino
1 x Game Joystick Shield V1 Expansion Board
1 x NRF24L01 2.4GHz Wireless RF Antenna Transceiver Module
1 x Bluetooth RF Transceiver Module RS232

• UNO R3 Board for Arduino has open circuit diagram of the original design, the development of software interface for free download.
• The Game Joystick Shield have Nokia 5110 LCD interface, nRF24L01 interface, Bluetooth Interface and I2C Interface.
• The Addicore nRF24L01 is a 2.4GHz ISM band transceiver. The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and enhanced ShockBurst, protocol engine.
• The bluetooth RF Transceiver Module RS232 allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer, Works with any USB Bluetooth adapters, Default Baud Rate: 9600,8,1,n, Built in antenna, Coverage up to 30ft.
• High quality and reliable product

UNO R3 Board for Arduino has open circuit diagram of the original design, the development of software interface for free download.