Features
1. It can be pasted light suction magnet directly without screws.
2. the PIR: it will turn on automatically when you passing by & turn off after leaving. 
3. If the light sensor detects enough light, when will not turn on even there is movement if human body.

Specifications:
1. Work Voltage: DC3-6V
2. Static features: 50uA
3. Induction distance: 3-5m
4. Induction agle: 5.Delay time: 6. Power  by 4*AAA BATTERY

Cautions:
1. Never install this light in the palce which is damp and with high temperature.
2. Never install the light in the b light in case affecting the sensitivity or disoperation.
3. Install the battery before using.
4. When Led getting dimming, lease recharge the battery. 

Packaging includes:
1pcs wireless motion sensor led light.

• Easily installation: an adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required
• 10 super bright LEDs with more sensitive motion detector provide excellent illumination and ideal for decorating your closet, bedroom, bathroom, gardens, etc; Long LED operating life of over 80,000 hours or more.
• Automatic sensing on or off (no No on/off switch): the light will light up when you get within 3 meter of it and will go out 15 seconds later after you walk out of its sensing range, also, it take 15s to light up agian once the light goes out. Ideal for the bedroom, baby room, closet, closets, cabinet, corridor, workshop, basement, garage, stairwell, oil depots, roof, door, drawer, trunk, garage entrances and other places.
• Battery Operated: powered by 1.5V x 4 AAA batteries(not included), Environment protective material, flexibility and good brightness.
• Motion-activated & energy saving - the light only turns on in darkness as it responds to nearby motion, making hallways and children's rooms safer. If there's no movement, sensors turn off the light after 15 seconds, conserving energy and ensuring long battery life

Easily installation: an adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required