Please note: Alaska, Puerto Rico and Hawaii We do not support delivery. Descriptions This USB 3.0 to SATA adapter cable lets you connect a 2.5in SATA hard drive or solid state drive to your computer through an available USB 3 port. The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details. This portable, cable-style adapter makes it easy to swap between hard drives without having to install your drives in an enclosure, and features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. Applications Take advantage of USB 3.0-enabled laptops or desktops with UASP for faster transfer speeds Create an external storage solution on the go, for desktops, laptops or Ultrabook computers Access any 2.5" hard drive or solid state drive from any USB enabled computer, for data migration or drive cloning Back up important data to an external storage device Retrieve data from an old SATA drive Use with an SSD drive to externally upgrade your laptop hard drive via USB 3.0 Hardware Specs: Bus Type: USB 3.0 Compatible with USB 2.0 and USB 1.0 Compatible Drive Types (Type and Rate): SATA Drive Size: 2.5in Fan(s): No Interface: USB 3.0 Number of Drives: 1 Performance Max Drive Capacity: Currently tested with up to 2TB 5900 RPM hard drives Type and Rate: USB 3.0 - 5 Gbit/s | SATA III (6 Gbps) UASP Support: Yes Connector(s): Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors 1 - USB 3.0 A (9 pin; SuperSpeed) Male Software/OS Compatibility: Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8/8.1 (32/64-bit) Mac OS X, Linux Special Notes / Requirements Note - Cable will work only with 2.5" SATA drives; 3.5"/5.25" drives are not supported Physical Characteristics: Product Height 0.4 in [9 mm] Product Length 19.7 in [500 mm] Product Weight 1.4 oz [41 g] Product Width 1.9 in [49 mm] Environmental Humidity 40%-85%RH Operating Temperature: 0°C to 60°C (32°F to 140°F) Storage Temperature: -10°C to 70°C (14°F to 158°F) Includes 1 - USB 3.0 to SATA 2.5" HDD Adapter Cable