Name: UCTRONICS Smart Robot Car Kit
This UCTRONICS smart robot car kit is an extremely flexible vehicular kit particularly designed for education, competition and entertainment purposes.
The panel of the kit carries some fixed holes to facilitate installation of various sensors and motor.
All the module interface has been modified with XH2.54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors.
This car used a HC-SR04 as a distance measurement, and it can automatic avoidance of obstacles.

Features:
Arduino Uno R3 is a microcontroller board based on the ATmega328P.
Operating Voltage: 5V
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal.

Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-contact measurement function.
The module includes ultrasonic transmitters, receiver and control circuit.
Working Voltage: DC 5V

The shield contains two L293D motor drivers and one 74HC595 shift register.
The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.

Tiny and lightweight with high output power. Servo can rotate approximately 180 degrees (90 in each direction).
Operating voltage: 4.8 V (~5V)

Package Including:
1pcs Arduino UNO R3 Board
1pcs HC-SR04 Ultrasonic Sensor Module
1pcs Holder for HC-SR04
1pcs L293D Motor Drive Expansion Board
1pcs 9g micro servo motor
1pcs servo motor Bracket
Some cable end pin header as gift
1set Car Chassis Kits:
· 2pcs 65mm tire Wheels
· 2pcs Geared Motors (1:48)
· 2pcs Speed Encoders
· 1pcs Universal Wheel
· 1pcs Battery Box
· 1pcs Car Chassis
· 1pcs Switch
· Screw+ Nut

• This UCTRONICS smart robot car kit is an extremely flexible vehicular kit particularly designed for education, competition and entertainment purposes
• This kit's package includes an Arduino UNO R3, a HC-SR04 Ultrasonic Sensor and holder, a L293D Motor Driver shield, a 9g micro servo motor and a set of 2WD Driver Motor Chassis Kits
• The panel of the kit carries some fixed holes to facilitate installation of various sensors and motor. All the module interface has been modified with XH2.54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors
• This car used a HC-SR04 as a distance measurement, and it can automatic avoidance of obstacles
• UCTRONICS Smart Robot Car Kit is a complete learning kit based on Arduino. For better learning a tutorial will provided (link for download), it will show you how to assemble the car and offer you the example code

This UCTRONICS smart robot car kit is an extremely flexible vehicular kit particularly designed for education, competition and entertainment purposesUCTRONICS