Compatible with: Only for iPhone 6 4.7inch LCD

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone 6 IOS is upgraded to the latest version.
5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away
after some time. Please leave phone alone overnight and see if this problem persists in the morning.

Package Include:
1* LCD Screen for iPhone 6 4.7inch
1* Phone Ring Stand
1* Set Repair Tool Kits
1* Retail Box
1* Instruction

Compatible for these versions: A1586/A1549/A1589.

• 1. Compatible with: Only fit for iPhone 6 4.7".Cann't fit with other models.
• 2. Better to watch some related Videos before starting.
• 3. Should recover home button with finger print sensor,front camera and metal plate from your old phone.
• 4. If the back housing has already damaged or depressed, please change a new one before changing a lcd screen.
• 5. Replace your damaged, cracked, shattered screen, or screens with display or touch response issues. If your back housing has been damaged or depressed, please change a new housing firstly,or the new screen will be damaged during installation.

1. Compatible with: Only fit for iPhone 6 4.7".Cann't fit with other models.SZHSR