How to use this paintless dent repair kits 1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4.Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6.Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7.Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8.Clean the repaired place with a clean wet cloth.

Product listing: 1PCS 100W glue gun
1PCS Bridge glue puller
4PCS Glue Stricks

• pdr tool kits for dent repair
• Easy to control,removal the dent by yourself
• High quality pdr tools and best price;Industry specific high durability plastic
• Professional grade dent pulling tab for autos
• Have"Super PDR" Logo on the products- Our bridge puller has the "super pdr " Logo on it, if there is not, it is a Fakes.

pdr tool kits for dent repairSuper Pdr