GameXcel &regSkin Sticker for Xbox 360 is printed with super-high resolution graphics. It protects your devices from scratching, fading, and peeling. Our patented advanced air-release vinyl guarantees a perfect installation.

Package Contains
- One(1)Skin(Sticker) for Xbox 360 Controller
- Actual controller not included.

Install
1) Clean your Xbox 360 Wireless Controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit PRIOR to installation.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker skin. Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Using a hair dryer or hot air gun is fine.

Note
Due to occasional heat, cold, or moist conditions at warehouse or during shipment, a few decals may lose some stickiness and cause peeling after applying. Please contact us directly by clicking Contact Seller button on Amazon order page. We stand behind our products and guarantee you a satisfactory solution.

• 【PROTECTORS CONTROLLER】 Vinyl decals for the wired and wireless xbox 360 skins controller protects your device from nicks and scratches. This computer game controller skin definitely gives your controller a whole new look. Protects your XBOX 360 from dust, scratches, damage and everyday use. Provides improved feel and grip during game play. Protects your controller from bumps and scrapes.
• 【PERFECT FIT】 Decal crafted to perfectly fit every corner, cutout and curve of the Microsoft control xbox 360. Skins, stickers, decals are engineered to fit perfectly and not interfere with other accessories. Specifically designed to fit exactly over the XBOX 360 controller.
• 【WONDERFUL GIFT】 Personalize your Microsoft Xbox 360 without adding bulk. High resolution and personalized graphics. It looks great and cool on your Xbox360 controller. Your Xbox360 controller will stand out from the crowd.
• 【EASY To APPLY】 XBOX 360 controller skins were easily applied. And easy to remove with no residue left on or damage done to your device. Simply peel your skin from its backing and stick it on your device. Leaves Behind No Sticky Residue. Will not Scratch, Fade (UV Resistant) or Peel. Controller Not Included.
• 【XBOX 360 SLIM SKIN INSTALL】 The cold environment/weather will effect the stickiness of the sticker. Before you applying the sticker on the device, please try to heating the sticker with hairdryer, so that the stickiness will be strengthened. When you applying the sticker, line up the edges and logo cut-outs so that everything will fall into place. At last, make sure every edge and cut-out of sticker is sticking flat to prevent the air.

【PROTECTORS CONTROLLER】 Vinyl decals for the wired and wireless xbox 360 skins controller protects your device from nicks and scratches. This computer game controller skin definitely gives your controller a whole new look. Protects your XBOX 360 from dust, scratches, damage and everyday use. Provides improved feel and grip during game play. Protects your controller from bumps and scrapes.Skinworks