The new SWM-5 allows installers to run an AT9 or AU9 satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 5 HD receivers! (DVRS require 2 lines each) Please Note: SWS series of splitters are specially designed for the SWM-5; you must have an SWS-2, SWS-4, or SWS-8. The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21. The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-5 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-5 unit

• Provides two outputs to serve two customer dwellings
• Die-cast housing is suitable for both indoor and outdoor use.
• Maximum Distance from SWM5 to Splitter: 200
• Provides AGC for the satellite input signal.
• Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99 / 101, 103 / 110 / 119 satellites, plus two Flex Ports (95 sat and 72.5 sat)

Provides two outputs to serve two customer dwellingsDIRECTV