Important notice: The mobile devices must be iPhone 4S/5 ,iPad 2,0/3,0 ,iPod with Bluetooth 4,0 and Samsung with Bluetooth 4,0 Prepare and Charge the Receiver Collar
1. Lift the rubber cover then connect the charger to the charging hole
2. When charging the receiver the red LED light will show up and change to green after fully charged
3. Put back the rubber cover to the charging hole

• In the Anti-Lost mode, the mobile device will be vibrating and ringing the warning tone.
• In the Fence mode, if the Receiver Collars left the set area, they will send out the vibration following with static shock for two times.
• The distance of anti-lost fence is will be charged along with the signal strength. The stronger signal, the longer distance.
• After successful connection, Switch icon will show up. Clicking to turn on/off
• Click or press static shock and vibration icon at the same time, the receiver will send out static and vibration meanwhile

In the Anti-Lost mode, the mobile device will be vibrating and ringing the warning tone.Junxin