Specifications:

Transmitter
Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 126
Chip Type: 2260
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 12V 27A(not included)
Remote Distance: 20m (Theoretical value)
Ambient TEMP: -30¡ãC -70¡ãC, Humidity Product DIM: 85x63x12mm

Receiver
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Output Type: Active Output
Max load: 10A
Ambient TEMP: -20¡ãC -65¡ãC , Humidity Factory Default: Self-locking
Board DIM: 45x30.5x17mm
Case DIM: 65x37x22mm


Operating Mode:
Hold down button until LED lights. Continue to hold. LED will go off. Continue to hold.
LED will flash once. Release button now for inching mode. Or continue to hold.
LED will flash twice. Release button now for self-locking mode. Or continue to hold.
LED will flash three times. Release button for interlock mode.


Program Mode in:
Hold down button until LED lights and release button while lit. LED will stay on. Press any key on remote. LED will flash twice confirming successful. Now press remote keys and relays will function as programmed. Inching= Single relay will stay on only as long as corresponding remote key is pressed.
Self-locking = Press corresponding key for on, press same key again for off, each relay independently.
Interlock = For each relay: press corresponding key for on (all others off).

Reprogram:
Hold the button down (about 3 sec.) until the LED lights up, then push a button on the transmitter. You should see the LED flash rapidly to show that it is accepting the signal. Release the button and you are finish link transmitter with receiver.

Package Includes:
1X Transmitter (Battery is not included)
4X Receivers
1X User's manual

• 1.One channel of output, the output can be independent, but also inching and interlocked
• 2.Can switch the working mode between inching, self-locking and interlocked
• 3.Wireless Coding Technology, No Direction, Switch Without Disturbing Each Other.
• 4.Can control electrical equipment of more than 1000W
• 5.Suitable for Remote control of the on and off of pump, machine-tool, LED lights and other Civil and industrial supporting remote areas.

1.One channel of output, the output can be independent, but also inching and interlockedOwfeel®