Specification:
LED: CREE XP-G2 S3 LED
Material: Polycarbonate
Dimensions：L66.7mm/2.63in×W26mm/1.02in×H13mm/0.51in
Weight：25g/0.882oz
Working voltage: 3.0V-5.0V
Battery：Rechargeable 300mAh lithium polymer battery
Charging time: 1 hours (charging current 5V/0.5A)
Accessories: User manual, USB cable, Lanyard.

NOTICE: The above-mentioned parameters are approximate and may vary between flashlights and environments.

Operation:
From OFF: 1 click for ON (Low mode)
From OFF: 2 click for Turbo From OFF: 3 click for STROBE
From STROBE: Long press (> 1 second) for SOS
From OFF: Press and hold for Momentary ON (Turbo), release to turn off
From ON: 1 click for OFF
From ON: Press and hold to cycle through modes (Low/Med/High/Turbo)

Alarm Switch (side button):
From any mode: Push the button up to activate Alarm (simultaneously Strobe)
From ON: Pull the button down to turn OFF

Notice: When the battery voltage is lower than 3.1V, the light will stop working; the Alarm function will continue to work for 2 minutes.

Warranty Service:
Guaranteed exchange up to 15 days after purchase: any defective product can be exchanged for a replacement through a local distributor/dealer within 15 days
After 15 days: all defective products can be repaired free of charge for a period of 2 years from the date of purchase
Lifetime workmanship guarantee: after the free maintenance period has expired, the maintenance service will charge for material expenses only, free of labor expenses.

• CREE XP-G2 S3 LED, Max 560 lumens.
• Instant access to Alarm, Strobe or Turbo,Charging and fully charged indicators.
• Standard Micro USB charging port, charges in just 1 hour on any USB port,Uses rechargeable 300mAh lithium polymer battery.
• Independent side Alarm switch design for quick access,Very loud (up to 115dB) siren.
• Designed for everyday carry- lanyard supplied, Multiple colors available .

CREE XP-G2 S3 LED, Max 560 lumens.MecArmy