Lowide Leaves LeafsOut WIDE Micro Mesh Rain Gutter Guard for 6" Gutters. DIY Install it yourself Leaf Guard Gutter Covers Protection System (A: 6" Sample)
Store: amazon
$ 5.00
Description
The LeafsOut Gutter Protection System consists of four main components: a front aluminum drip edge; a stainless steel V-Bend micro mesh with 30 holes per inch (900 holes per sqin); a water siphon control strip under the mesh and a back aluminum strip adding strength and simp0lifying installation.
This type of gutter guard can be installed on various gutter types such as Ogee, half round, fascia, curved, box and many types of roofs such as asphalt shingle, wood shake, flat tile, Spanish tile and stone coated steel. LeafsOut's specifications were uniquely designed so that it simply slips under the roof shingles and rests on top of the roof-deck/water-barrier (tar paper) to clamp the gutter guard in place and stabilize its structure. The solid aluminum front fits snug to the front lip of the gutter via three self-tapping screws for each four foot length section. LeafsOut should be installed at the same pitch as the roof (up to a 6/12 pitch) to get the best performance of debris shedding off.
- Fits Wider 6" rain gutters, sections are 4 feet long
- Eliminates gutter cleaning forever
- Easy installation Handles over 100 inches of hourly rainfall
- Fits on existing rain gutters, no need to replace existing rain gutters
- Barely visible from the ground
- Fits on virtually any existing rain gutter and roof type
- Keeps out wasps and other pests
- Filtered water can also be used in rainwater harvesting
- Will not degrade with exposure to the suns UV rays
- Does not require replacement of existing gutters
- Ships FedEX ground and shipping is included
- Includes manual and 3 self tapping screws per section (excluding the sample)
- Patented design
Can also be installed by bending lengthwise and attaching the back to the fascia if the roof material can't be lifted.
This type of gutter guard can be installed on various gutter types such as Ogee, half round, fascia, curved, box and many types of roofs such as asphalt shingle, wood shake, flat tile, Spanish tile and stone coated steel. LeafsOut's specifications were uniquely designed so that it simply slips under the roof shingles and rests on top of the roof-deck/water-barrier (tar paper) to clamp the gutter guard in place and stabilize its structure. The solid aluminum front fits snug to the front lip of the gutter via three self-tapping screws for each four foot length section. LeafsOut should be installed at the same pitch as the roof (up to a 6/12 pitch) to get the best performance of debris shedding off.
- Fits Wider 6" rain gutters, sections are 4 feet long
- Eliminates gutter cleaning forever
- Easy installation Handles over 100 inches of hourly rainfall
- Fits on existing rain gutters, no need to replace existing rain gutters
- Barely visible from the ground
- Fits on virtually any existing rain gutter and roof type
- Keeps out wasps and other pests
- Filtered water can also be used in rainwater harvesting
- Will not degrade with exposure to the suns UV rays
- Does not require replacement of existing gutters
- Ships FedEX ground and shipping is included
- Includes manual and 3 self tapping screws per section (excluding the sample)
- Patented design
Can also be installed by bending lengthwise and attaching the back to the fascia if the roof material can't be lifted.
- Eliminates gutter cleaning forever!
- Fits on existing rain gutters, no need to replace existing rain gutters
- Surgical grade stainless steel micro mesh
- Keeps out wasps and other pests, leaves, pine needles, maple seeds, and roof grit
- Pattented design, come in 4 foot long sections
Related Products
CREATE SALE ALERT
Waiting for this item to go on sale? We'll send an email if the price drops.
By entering your email address, you are agreeing to our Terms of Service, Privacy Policy, and to receive emails from Fashioncommue