Features
1. Surface: Black frosted,High quality carbon Steel, corrosion protection
2. Track and Roller Arm Thinkness: 6 mm
3. Stopper: Rubber covered, good buffer effect, reduce the noise
4. Passed the test of opening - closing: 100000 times
5. Roller bearing: High purity bearing steel Gcr15, wear-resisting, ensure the stability of the move and the wheel's fluency


Fit for
1. Door weight capacity: 200lb each door
2. Doors Thickness for: 35-40mm
3. The hardware kit is for double door
4. We accept custom-made


8 FT(2.44m) kit's included
Roller: 4pcs
Sliding track: 2pcs
track & wall spacer: 8pcs
Door stopper: 4pcs
Floor guide: 2pcs
Anti-pad: 4pcs
Hex wrench: 1pc
Installation manual:1pc


Prompt
1. Only the hardware is for sale. Door is not included
2. The price is not including taxes or duties
3. Track's length should be twice of your door panel's width,please select the length based on the door panel or opening
4. The gap between THK 40mm door panel and the wall is about 16mm,height from the top of the door panel to the top of the roller is about 130mm for reference


After-sale service
1. 5 years Warranty.
2. If you received damaged items,please kindly take a photo and e-mail us,we will re-send the replacement.
3. Any problem please contact us freely before you open a case, we will solve it out, thank you!
4. If you have any other ideas, please advise.

• Surface: Black frosted,High quality carbon Steel, corrosion protection
• Track and Roller Arm Thinkness: 6 mm, Screws: 8.8 grade high strengh bearing capacity
• Stopper: Rubber covered, good buffer effect, reduce the noise
• Passed the test of opening - closing: 100000 times
• Roller bearing: High purity bearing steel Gcr15,wear-resisting, ensure the stability of the move and the wheel's fluency

Surface: Black frosted,High quality carbon Steel, corrosion protectionHomeDeco Hardware