DO YOU KNOW?
20% under-inflation reduces tire lifetime by 30%;
30% over-inflation reduces tire lifetime by 45%;
30% pressure lower looks like proper inflated tire

FociPow Tyre Pressure Monitoring System will make ensure your tire pressure is at its proper level and increase tire life and traffic safety.

Monitor Specification
Dsplay: LCD color screen
Working temperature: -20℃ - 75℃
Storage temperature: -30℃ - 80℃
Operating voltage: 3.7 - 5V
Black operating current: RF transmission frequency: 433.92Mhz±50KHz
RF signal reception sensitivity: -90dbm

Sensor Specification
Battery life: ≥2 Years
Working temperature: -30℃ - 80℃
Storage temperature: -35℃ - 85℃
Pressure range: 0 - 6 bar (0 - 87psi)
Temperature accuracy: ±2 ℃ (25℃)
Working pressure: 0-99Psi
Pressure accuracy: ±1.5Psi
IP: IP67
Transmit power: Transmit frequency: 433.92Mhz Dimension: ≤21mm(diameter)*17mm(high)
Weight: 8.0g

Tips for Sensors Installation
1. Please make sure receiver is open when installing sensor.
2. Please prepare corresponding sensor and anti-thief nut.
3. Take off cap of valve, make sure the top of valve is smooth, no break(or there will be leakage)
4. Screw anti-thief nut by clockwise
5. Install corresponding sensor by clockwise(don't force it too hard to damage sensor)
6. Check leakage by using foam, ensure no leakage
7. Tighten anti-thief nut by wrench with reverse, make sure anti-thief nut is close to external sensor(fix sensor by lft hand, wrench moderately force by right hand)
8. Installation other sensors by the same method.

Package List
1xTire pressure monitor
4x External sensor
4x Anti-thief nut
1x Wrench
1x Tool of replacement battery
4x Waterproof O-Ring
1x Charger
1x User Manual

• Precision detection system, good accuracy for measuring pressure and temperature for your vehicle every day.
• Large solar panel, also including USB connector charge; Battery replaceable, long battery life time.
• Sends the real time tire information to the monitor via wireless transmission and monitor displays the real time tire pressure and temperature.
• 4 sensors have been coded to the display, just install the sensors as per the position labels on the sensor (RR, RF, LF, LR), a replacement sensor can be easily coded; just simply mount the sensor onto the valve when the display is in coding mode.
• Monitor should be placed inside the car without obstruct vision of drive.

Precision detection system, good accuracy for measuring pressure and temperature for your vehicle every day.FociPow