Specification:
Measuring range: 0 to ±1.49KV ( Low range).
±1.0kV to ± 30.00kV ( High range).
(range hysteresis: ±1.0kV to ±1.5kV).
0 to ±300V ( low balance measuring range).
Measuring distance: 1"±1/64" ( 25mm±0.5mm), LED guide for correct distance.
( between object and field meter).
Response time:
LCD display renewal rate: 5 times/s.
Accuracy: ±10%.
Ambient conditions: 50°-100°F, (10°- 40°), 0-60%RH ( non-condensing).
Display features: Bar graph, red LCD positive polarity voltage, blue LCD.
negative polarity voltage.
Bar graph precision: ±0.1kV for low range ±2kV for high range.
±20V for ion balance range.
Digital reading: Auto-ranging , three digits x.xx=0 to ±1.49kV.
xx.x=±1.0kV to ±30.0kV(Hi).
xxx=0 to 300 ( lon balance).
lon balance mode display: (IB) is displayed.
Battery capacity display indicator.
HOLD switch to retain display after measurement.
Error sign (ERR) appears if the sensor is damaged.
Alarm feature: Beep sound will be heard during the following actions.
Power on: one beep.
Power on with auto Off feature disabled: {Depress power button. for more than 3 seconds} three beeps.
Auto power-Off : short beeps at 1 seconds interval for 5 seconds. before power off.
Over range: continuous sound.
Auto power-off: Power turns off automatically after five minutes,{ A OFF} is.
display whenever this features is disabled.
Power source: 9V, manganese battery (Battery Not Included because of Shipping Policy).
Battery life: In excess of 30 hours.
Size: 123mm (L) x 73mm (W) x 25mm (D).
Weight: 170g.
Case material: Conductive resin( ABS).

• SIMCO FMX-004 electrostatic field reflectoscope reflector is a non-contact portable electrostatic field measuring instrument is surveys the object surface static electricity value and the survey static electricity eliminates equipment's ion trim
• 1. Easy to read, easy to use operation 2. Light weight, compact design 3. Range light assures accurate and repeatable measurements
• 4. Digital and bar graph display 5. Automatic power off after five minutes (may be disabled if preferred)
• The FMX-004 is a convenient compact and pocket size electrostatic field meter. With this field meter you can measure and store the field strength and polarity.
• It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LED. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display

SIMCO FMX-004 electrostatic field reflectoscope reflector is a non-contact portable electrostatic field measuring instrument is surveys the object surface static electricity value and the survey static electricity eliminates equipment's ion trimElectrostatic Field Meter FMX-004 Electrostatic Fieldmeter electrostatic tester ESD Test