Packing list: 1 x Dual port 2.5 "/3.5" IDE SATA hard drive base 1 x USB cable 2.0 1 x Power adapter 1 x English manual 1 x CD Specifications: Material: Plastic Color: Black + Red Input voltage: AC 110-240V, 50/60HZ, 1.0A Output voltage: DC 12V Specifications: EU Plug Support capacity: 2TB Transmission interface: USB 3.0 Transmission speed: 480 Support hard disk status: support IDE / SATA hard disk read at the same time, hot swap, tool-free disassembly LED indicator light: to indicate the power and A, B hard disk read and write status Basic operation: 1. Plug the SATA hard disk into the hard disk base. 2. Plug the DC / 12V power supply to the hard disk base. Turn on the power switch and the blue light stands power is on. Make sure the hard drive has turned up. 3. Connect the USB cable to the hard drive and the computer. Open my computer can see the drive letter, the red signal light will light when read disk. (If it is the new hard disk, please work as the following: My computer right click / management / disk management. Can be partitioned and formatted.) 4. Press the one-button backup button to make one-touch backup. (See the one-button backup and hard cloning instructions for details). 5. Hardware backup (see the one-button backup manual). 6. You can plug two USB 2.0 devices, connected to USB2.0 HOST.