TECKLED Digital Tire Inflator:
1.Nozzle Length:80mm
2.Highest Pressure: ≤0.8Mpa
3.Use Pressure: 0.2-0.4Mpa
4.Four measurement units: 0-150 PSI,0-10 Bar,0-10 Kg/cm2, 0-1000 kpa.Accuracy:±2%
5.Nozzle seals to valve stem for quick and accurate measurements
6.Valve controller:easy to deflate or tightened to avoid leaking
7.LCD Digital Display Backlit Screen
Short press button "UNIT" to power on
When power on, short press "UNIT" to switch preesure-measuring unit, while long press to power off.
After measuring tire pressure,the inflator will auto off after 30 seconds without any operation.
Instructions:
1.Unscrew the lid of tire valve, which refer to the lid of gas nozzle on tire that used to inflate.
2.Fasten the air chunk of tire inflator and press it tightly on tire valve, pinch the air chunk, and till it perfectly connects with gas nozzle of tire, then release.
Note:
If they can not well connect, connect a 90 Degree Valve Extender(not included) onto air chunk and it will help, as different vehicles have different stem clamps.
3.Tire inflator will display tire pressure.
If tire pressure is insufficient, deflate back to zero
If too high, press release valve and adjust to the proper tire pressure
If too low, inflate tire as follows: firstly, connect gas nozzle of air compresswor with air intake of tire inflator
After that, pinch the inflatable switch trigger and it can inflate.
4.Once done, press release valve and make the pointer back to zero. After that, switch the lid of tire valve back.
Note:
1.When measuring tire pressure, tire should keep cool
2.For the standard tire pressure, requirements of automobile factories or tire manufacturers shall prevail.

• Durable Metal Casting Design: Adequate sealability to avoid leakage of air which can greatly helps increase the measurement accuracy
• Digital Backlit LCD Screen - Ultimate visibility, reduce tire wear and extend tire life
• Ergonomic Design - Contoured to fit your hand by a soft, nonslip texture for ultimate comfort and control
• Accurate & Easy - Simple push button with gentle pressure, nozzle seals onto the valve stem quickly and efficiently
• Versatile use - ideal for cars, trucks, motocycles, bicycles tyres etc

Durable Metal Casting Design: Adequate sealability to avoid leakage of air which can greatly helps increase the measurement accuracyTECKLED