Includes:

Currie 9-Plus Round-Back Rear End with 31 Spline Axles (# CE-UHR55INX)
• 9-Plus roundback housing
• 55" Overall width
• Housing is built housing-centered with a 0.94" pinion offset
• Steel 3" diameter tubes
• Small webbed-style center easily accepts triangulated 4-link brackets
Axles include:
• Both 5 x 4 1/2" and 5 x 4 3/4" wheel bolt patterns
• Includes one set of 7/16" studs and one set of 1/2" studs
• 1/4" Thick heavy-duty bearing retainer plates
• Tapered Timken style wheel bearings pressed on
Wilwood 11" Disc Brake Kit with Drilled/Slotted Rotors and Black Calipers (# 140-11389-D)

Brake Kit includes

• Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats
• 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns
• Low-Profile 4 Piston Dynapro Calipers - Black
• Drum Parking Brake Assemblies with Caliper Mounting Brackets
• Bearing Retainers
• BP-10 Smart Compound Brake Pads
• All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
Parking Brake Cable Kit
• Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
Flexline Kit
• Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
• Also includes weld-on line tabs to install on your rear end
Hard Line Kit
• Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
• Rubber hose connects those hard lines to the line on the frame
• Note: Tubing bending is generally necessary for the installation of these lines

• Currie Enterprises 9" Ford 55" Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled/Slotted Rotors and Black Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # UHR55INX-K6) > These are ideal for Street Rods, Hot Rods, Rat Rods, Restorations, and numerous other projects | Includes: | Currie 9-Plus Round-Back Rear End with 31 Spline Axles (# CE-UHR55INX) > 9-Plus roundback housing
• 55" Overall width > Housing is built housing-centered with a 0.94" pinion offset > Steel 3" diameter tubes > Small webbed-style center easily accepts triangulated 4-link brackets > Axles include: > Both 5 x 4 1/2" and 5 x 4 3/4" wheel bolt patterns > Includes one set of 7/16" studs and one set of 1/2" studs > 1/4" Thick heavy-duty bearing retainer plates > Tapered Timken style wheel bearings pressed on
• Wilwood 11" Disc Brake Kit with Drilled/Slotted Rotors and Black Calipers (# 140-11389-D) | Brake Kit includes > Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats > 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns > Low-Profile 4 Piston Dynapro Calipers - Black > Drum Parking Brake Assemblies with Caliper Mounting Brackets > Bearing Retainers > BP-10 Smart Compound Brake Pads > All Hardware to install the complete braking system on both rear wheels
• Parking Brake Cable Kit > Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit > Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines > Also includes weld-on line tabs to install on your rear end
• Hard Line Kit > Steel hard brake line tubing to connect the chassis fittings to the included rubber hose > Rubber hose connects those hard lines to the line on the frame > Note: Tubing bending is generally necessary for the installation of these lines

Currie Enterprises 9" Ford 55" Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled/Slotted Rotors and Black Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # UHR55INX-K6) > These are ideal for Street Rods, Hot Rods, Rat Rods, Restorations, and numerous other projects | Includes: | Currie 9-Plus Round-Back Rear End with 31 Spline Axles (# CE-UHR55INX) > 9-Plus roundback housingCurrie