Cargo Blocker works in pickup trucks that use a drop-in plastic liner. Directions For Use: 1. Place cargo all the way to the front of the truck bed (near cab), and over to the far left or far right side of the bed. 2. Adjust wedge to the desired angle by pulling the spring puller back, move the wedge to the proper angle, release the spring puller and place into the recess of the wedge. 3. Rotate the "T" to a downward position. 4. Place CargoBlocker perpendicular next to cargo. 5. Slide the spring-loaded "T" toward the cargo to apply pressure (do not compress spring more than 50% of visible length). 6. Then place the "T" in liner groove. Now the cargo is blocked between the sidewall and the CargoBlocker.

• Quick easy way to minimize side to side shifting or rolling cargo
• Blocks Cargo against side wall of a truck using spring tension and proper wedge angle.
• Many uses: Tool Boxes, coolers, Lumber, Pipe, Gas Cylinders, and Crates.

Quick easy way to minimize side to side shifting or rolling cargoWeldcote Metals