* Tynex SKU# Ty156529, * Model# BCT010009D

Features:
2500W max continuous power
Modified sine wave
Over Temperature protection
Over Load protection
Single 20 amp ac receptacle attached to a built-in 13 foot extension cord that can be used with a separate spliter if extra outlets are needed. Surge power strips not recommended.
Thermally controlled dual cooling fans
Internally fuse protected
ac output short circuit protection
Auto reset on most fault conditions
Battery terminals are designed to conduct more current therefore requiring only one set of cables.
Aluminum case for optimal cooling
Pre-slotted mounting plate
1 Year Warranty Parts and Labor

Specifications:
Continuous output power: 2500 Watts. Use 200 amp inline fuse.
Surge power capability (peak power): 5000 Watts
dc input / operating voltage: 10 to 15 Volts
Output voltage: 120 Volts ac +/- 10%
Output wave form: modified sine wave with phase correction
Output frequency: 60 Hz +/- 1 Hz
Battery low voltage alarm: 10.5 +/- 0.5 Volts
Battery low voltage shutdown: 10.0 +/- 0.5 Volts
AC amps: 21
DC amps: 208
No load current: 2.1 Amps with switch in the on position.
Full load efficiency: 90%
1/3 load efficiency: 95%
No load minimum operating temperature: -15 degrees Celsius
Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown)
AC Output Socket Type: dual Type 2 -3 prong
High input voltage protection: 15V-17V
Low input voltage shutdown: 10V
Internal fuse protection
Product size (L x W x H): 18.75"X 9.5"X 3.75"
UL maximum recommended per outlet 1500W

• This inverter includes a 20 amp outlet on a built-in 13 foot cable. Perfect for inverters that are installed in hard to reach areas. Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances.
• The waveform produced by a Modified Sine Wave Power Inverter is "blocky," resembling a set of steps, whereas the waveform produced by utility companies is smooth, much like a curvy road. Therefore, because of the type of waveform the Modified Sine Wave Power Inverters produce, they are suitable for most applications.
• Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you're looking to make a pot of coffee, run a heater or air conditioner, or appliances that can withstand occasional electrical noise, a Modified Sine Wave Inverter is a cost-effective solution.
• To select the right inverter, first determine what devices you would need to run in the event of a power outage. Then, select the appropriate inverter that can carry the combined wattage requirements of these devices. Some appliances have a start up amperage. At AIMS, you'll discover our inverters range from 75 watts up to 8000 watts - more than enough to power nearly every application imaginable.

This inverter includes a 20 amp outlet on a built-in 13 foot cable. Perfect for inverters that are installed in hard to reach areas. Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances.AIMS