How to use:

Plug in the electric cord to the main electric outlet

Select the desired speed by turning the variable speed control knob on the handpiece

To secure the bits: push in the desired bit firmly into the hole

To remove the bits: turn off the machine and gently pull the bit out.

Safety Tips:

Do not use near or place in water. If motor falls into water, unplug immediately.do not reach into water

Do not touch the bit after use. The bit is too hot to be touched by bare hands

Keep dust out of eyes and lungs by using protective eye-wear or a dust mask

Always unplug it after use

When the machine is not in use, all tool must be stored in a dry location and keep away from children.

Always unplug the tool when you change accessory

Package

1 x Pen-Shape Nail Drill

1 x Power adapter

6 x Metal Grinding Drill Bits

6 x Sanding bands

1 x English Manual

• 6 Optional Bits (5 diamond bits, 1 emery rod with 6 sanding bands)
• Variable speed control: 3,000 RPM up to 20,000 RPM
• Voltage: AC 100-120V (US plug)
• Multi use: carving, engraving, routing, grinding, sharpening, sanding, polishing, drilling and so on
• Size: 6.2" INCHES 16cm (L) x 2.4cm (Diameter of handpiece)

6 Optional Bits (5 diamond bits, 1 emery rod with 6 sanding bands)Newgate